Sun
Products

Used Oxidizers & Related Equipment

USED Equipment FOR ENvironmental remediation

Restrictive budget? Used oxidizers are an excellent solution. We select only the best equipment for our used inventory and work hard to match the right equipment with the right buyer and right site.

We offer quality used environmental and industrial remediation equipment like our used oxidizer or used regenerative thermal oxidizer available as-is, refurbished or with certified performance warranties.

Looking to sell used remediation equipment, used regenerative thermal oxidizers, industrial oxidizers, or related equipment? Let Intellishare purchase or broker the equipment for you.




  • Unit 101 - Multi-Phase Extraction & Treatment Trailer

    Unit 101
    • Dual axle, heavy duty trailer
    • Gray color, nominal 8' by 16' size
    • Dual rear doors, single side door
    • Jack stands at each corner
    • Interior lights, exhaust fan, electric heater
    • Wired for Class 1, Division 2, Group D
    • Busch Claw Blower - Model 1302 with 7.5hp VFD control
    • Up to 150 CFM @ 20” HGV at inlet connection
    • Three well inlet manifolds with adjusting valves and vacuum gauges
    • 50 gallon vapor liquid separator with high level liquid sensor
    • Equipped with full air flow, vacuum, pressure, temperature indicators and sampling ports
    • 15 GPM condensate pumping system
    • Manual fresh air valve
    • Breaker panel
    • Main relay logic control panel
    • 208/3/60 power feed, 150 amp
    Interested in this Product?Get a hold of us for more information
  • Unit 102 - Multi-Phase Extraction & Treatment Trailer

    Unit 102

    • Dual axle, heavy duty trailer
    • Black color, nominal 8' by 16' size
    • Dual rear door, single side door
    • Jack stands at each corner
    • Interior lights, exhaust fan, electric heater
    • Wired for Class 1, Division 2, Group D
    • Busch Claw Blower - Model 1502
    • Up to 300 CFM @ 20” HGV at inlet connection
    • Four well inlet manifolds with adjusting valves and vacuum gauges
    • 50 gallon vapor liquid separator with high level liquid sensor
    • Equipped with full air flow, vacuum, pressure, temperature indicators and sampling ports
    • 15 GPM condensate pumping system
    • 25 GPM oil water separator
    • Manual fresh air valve
    • Breaker panel
    • Main relay logic control panel
    • 208/3/60 power feed, 100 amp
    Interested in this Product?Get a hold of us for more information
  • Unit 103 - 250 CFM Electric Catalytic Oxidizer

    Unit 103
    • 100-250 SCFM
    • Good condition; recently refurbished
    • 50% heat exchanger
    • New catalyst
    • 250kw electric heater
    • 230/3/60 power input
    • PLC controls
    • Dimensions: Length 3', Width 8', Height 3'
    Interested in this Product?Get a hold of us for more information
  • Unit 104 - 1,000 CFM Thermal Oxidizer

    Unit 104
    • Manufactured in 2005
    • Skid mounted
    • Very good condition; low run time hours
    • Air flow capacity 250-1000 SCFM
    • 3 MMBTUH burner with ratio control & gas train
    • Inlet flame arrestor
    • Gas train connection 1.5 NPT, 2-5 psig
    • Natural gas or propane
    • Inlet connection 6' flanged
    • Main process fan 7.5 hp
    • Burner combustion air blower 3hp
    • Fresh air inlet damper
    • Stack to 10' above ground level
    • Relay control panel with 480/3/60 power input, 25 amp
    • Temperature controllers, high limit and flame safety programmer
    • Can be equipped with catalyst module
    • Dimensions: Length 13', width 7', height 7'
    • Weight 7,500 lbs
    Interested in this Product?Get a hold of us for more information
  • Unit 105 - 500 CFM Thermal Oxidizer

    Unit 105
    • Very good condition - low hours
    • Air flow capacity 150 - 500 CFM
    • Natural gas or propane
    • 1.5 mmBtuh burner with ratio control and gas train
    • Gas train connection 1" NPT, 2-5 psig
    • Inlet flame arrestor
    • Inlet connection 4" flanged
    • Burner combustion air blower 2hp
    • Relay control panel with 480/3/60 power input, 15 amp
    • Temperature controllers, high limit and flame safety programmer
    • Can be equipped with catalyst module
    • Manufactured in 2003
    • Dimensions L=11', W=6', H=7'
    • Weight = 4,000 lbs


    Interested in this Product?Get a hold of us for more information
  • Unit 106 - 2,000 CFM Thermal Accelerator

    Unit 106
    • 2 units available
    • Excellent condition
    • Manufactured in 2014
    • 10,000 operating hours
    • Airflow capacity 500 - 2,000 SCFM
    • Processing capability up to 8 mmBtuh
    • Detonation arrestor
    • Gas train connection 2" NPT, 2-5 psig
    • Natural gas or propane
    • Liquid fuel train 3/4", 20 psig @ 40 gph
    • Process inlet connection 10" flanged
    • Stainless steel stack, 30" diameter, 15' AGL
    • Allen Bradley PLC based control panel
    • 480/3/60 power input, 30 amp
    • Honeywell burner control and high limit
    • Dimensions L=32', W=8', H=10'
    • Weight 12,000 lbs


    Interested in this Product?Get a hold of us for more information
  • Unit 107 - 1,000 CFM Chlorinated Catalytic Oxidizer

    Unit 107
    • Excellent condition
    • 30,000 operating hours
      Air flow capacity 500 - 1,000 SCFM
    • 316L stainless steel construction
    • Heat exchanger - 316L stainless steel, 60% tube and shell
    • Externally insulated and clad in aluminum
    • Gas train connection 1" NPT, 2-5 psig, 1 mmBtuh, natural gas or propane
    • Process inlet connection 8", 150# flange
    • Process blower 7.5 hp
    • Primary air burner with 2hp combustion air blower
    • Allen Bradley PLC controls with HMI 480/3/60, 20 amp
    • Manufactured in 2011
    • Skid mounted
    • Stainless steel stack, 12" diameter
    • Dimensions L=12', W=8.5', H=10'
    • Weight 7,500 lbs
    Interested in this Product?Get a hold of us for more information
  • Unit 108 - 5,000 CFM Regenerative Thermal Oxidizer (RTO)

    Unit 108
    • 2 chamber RTO
    • Excellent condition
    • Air flow capacity 2,000-5,000 SCFM
    • Heat recovery 93-95%
    • Pneumatic poppet valve
    • Allen Bradley PLC controls with HMI (new in 2014)
    • Power input 480/3/60 100 amp
    • Allen Bradley Series 700 main fan VFD
    • Pressure control
    • 40hp process blower
    • 3hp combustion blower
    • Fresh air damper
    • Inlet isolation valve
    • Burner and gas train 5 psig, 600 CFH
    • Compressed air pnput 20 CFH, 70-100 psig, -40 dew point
    • Manufactured in 2008
    • Stack to 20' AGL
    • Dimensions L=25', W=12.5', H=17'
    • Assembled Weight 40,000 lbs 
    Interested in this Product?Get a hold of us for more information
  • Unit 109 - 2,000 CFM Recuperative Thermal Oxidizer

    Unit 109
    • Good condition
    • Operated indoors
    • Air flow capacity 500 - 2,000 SCFM
    • Stainless steel 50% efficient heat exchanger
    • Secondary air burner, 1.7 mmBtuh
    • Gas train connection 1.5" NPT, 2-5 psig, natural gas or propane
    • Process inlet connection 10" 150# flange
    • Stack - stainless steel 18" diameter
    • Allen Bradley PLC controls with HMI, 480/3/60, 30 amp
    • Process blower 15 hp
    • Catalyst module ready
    • Manufactured 2004
    • Skid mounted
    • Dimensions L=16', W=9', H=9'
    • Weight 8,500 lbs
    Interested in this Product?Get a hold of us for more information
  • Unit 110 - 500 CFM Thermal Oxidizer with Soil Vapor Extraction System

    Unit 110
    • 2 units available
    • Excellent condition
    • Air flow capacity 200-500 SCFM
    • Primary air burner with combustion air blower, 1.5 mmBtuh
    • Gas train connection, 1.5" NPT, 2-5 PSIG, natural gas or propane
    • Pheumatic operated gas train
    • Process inlet connection 4", 150# flange
    • Allen Bradley safeth PLC controls with HMI, 480/3/60, 40 amp
    • Built to SIL standards
    • Soil vapor extraction positive displacement blower with VFD
    • 50 gallon vapor liquid separator with level controls and pump
    • Catalyst module ready
    • Stainless steel stack to 15' AGL
    • Manufactured 2007
      Skid mounted
      Dimensions L=16', W=10', H=8'
      Weight 9,500 lbs
    Interested in this Product?Get a hold of us for more information