Sun

Used Thermal Oxidizers

Used Thermal Oxidizers

  • Unit 104 - 1,000 CFM Thermal Oxidizer

    Unit 104
    • Manufactured in 2005
    • Skid mounted
    • Very good condition; low run time hours
    • Air flow capacity 250-1000 SCFM
    • 3 MMBTUH burner with ratio control & gas train
    • Inlet flame arrestor
    • Gas train connection 1.5 NPT, 2-5 psig
    • Natural gas or propane
    • Inlet connection 6' flanged
    • Main process fan 7.5 hp
    • Burner combustion air blower 3hp
    • Fresh air inlet damper
    • Stack to 10' above ground level
    • Relay control panel with 480/3/60 power input, 25 amp
    • Temperature controllers, high limit and flame safety programmer
    • Can be equipped with catalyst module
    • Dimensions: Length 13', width 7', height 7'
    • Weight 7,500 lbs
    Interested in this Product?Get a hold of us for more information
  • Unit 105 - 500 CFM Thermal Oxidizer

    Unit 105
    • Very good condition - low hours
    • Air flow capacity 150 - 500 CFM
    • Natural gas or propane
    • 1.5 mmBtuh burner with ratio control and gas train
    • Gas train connection 1" NPT, 2-5 psig
    • Inlet flame arrestor
    • Inlet connection 4" flanged
    • Burner combustion air blower 2hp
    • Relay control panel with 480/3/60 power input, 15 amp
    • Temperature controllers, high limit and flame safety programmer
    • Can be equipped with catalyst module
    • Manufactured in 2003
    • Dimensions L=11', W=6', H=7'
    • Weight = 4,000 lbs


    Interested in this Product?Get a hold of us for more information
  • Unit 106 - 2,000 CFM Thermal Accelerator

    Unit 106
    • 2 units available
    • Excellent condition
    • Manufactured in 2014
    • 10,000 operating hours
    • Airflow capacity 500 - 2,000 SCFM
    • Processing capability up to 8 mmBtuh
    • Detonation arrestor
    • Gas train connection 2" NPT, 2-5 psig
    • Natural gas or propane
    • Liquid fuel train 3/4", 20 psig @ 40 gph
    • Process inlet connection 10" flanged
    • Stainless steel stack, 30" diameter, 15' AGL
    • Allen Bradley PLC based control panel
    • 480/3/60 power input, 30 amp
    • Honeywell burner control and high limit
    • Dimensions L=32', W=8', H=10'
    • Weight 12,000 lbs


    Interested in this Product?Get a hold of us for more information
  • Unit 108 - 5,000 CFM Regenerative Thermal Oxidizer (RTO)

    Unit 108
    • 2 chamber RTO
    • Excellent condition
    • Air flow capacity 2,000-5,000 SCFM
    • Heat recovery 93-95%
    • Pneumatic poppet valve
    • Allen Bradley PLC controls with HMI (new in 2014)
    • Power input 480/3/60 100 amp
    • Allen Bradley Series 700 main fan VFD
    • Pressure control
    • 40hp process blower
    • 3hp combustion blower
    • Fresh air damper
    • Inlet isolation valve
    • Burner and gas train 5 psig, 600 CFH
    • Compressed air pnput 20 CFH, 70-100 psig, -40 dew point
    • Manufactured in 2008
    • Stack to 20' AGL
    • Dimensions L=25', W=12.5', H=17'
    • Assembled Weight 40,000 lbs 
    Interested in this Product?Get a hold of us for more information
  • Unit 109 - 2,000 CFM Recuperative Thermal Oxidizer

    Unit 109
    • Good condition
    • Operated indoors
    • Air flow capacity 500 - 2,000 SCFM
    • Stainless steel 50% efficient heat exchanger
    • Secondary air burner, 1.7 mmBtuh
    • Gas train connection 1.5" NPT, 2-5 psig, natural gas or propane
    • Process inlet connection 10" 150# flange
    • Stack - stainless steel 18" diameter
    • Allen Bradley PLC controls with HMI, 480/3/60, 30 amp
    • Process blower 15 hp
    • Catalyst module ready
    • Manufactured 2004
    • Skid mounted
    • Dimensions L=16', W=9', H=9'
    • Weight 8,500 lbs
    Interested in this Product?Get a hold of us for more information
  • Unit 110 - 500 CFM Thermal Oxidizer with Soil Vapor Extraction System

    Unit 110
    • 2 units available
    • Excellent condition
    • Air flow capacity 200-500 SCFM
    • Primary air burner with combustion air blower, 1.5 mmBtuh
    • Gas train connection, 1.5" NPT, 2-5 PSIG, natural gas or propane
    • Pheumatic operated gas train
    • Process inlet connection 4", 150# flange
    • Allen Bradley safeth PLC controls with HMI, 480/3/60, 40 amp
    • Built to SIL standards
    • Soil vapor extraction positive displacement blower with VFD
    • 50 gallon vapor liquid separator with level controls and pump
    • Catalyst module ready
    • Stainless steel stack to 15' AGL
    • Manufactured 2007
      Skid mounted
      Dimensions L=16', W=10', H=8'
      Weight 9,500 lbs
    Interested in this Product?Get a hold of us for more information