Sun

Used Thermal Oxidizers

Used Thermal Oxidizers

Used Thermal Oxidizers

View our current list of used and refurbished thermal oxidizers that are avaible for purchase. If you are interested in one or have any questions, please feel free to contact us.

  • Unit 105 - 500 CFM Thermal Oxidizer

    Unit 105
    • Very good condition - low hours
    • Air flow capacity 150 - 500 CFM
    • Natural gas or propane
    • 1.5 mmBtuh burner with ratio control and gas train
    • Gas train connection 1" NPT, 2-5 psig
    • Inlet flame arrestor
    • Inlet connection 4" flanged
    • Burner combustion air blower 2hp
    • Relay control panel with 480/3/60 power input, 15 amp
    • Temperature controllers, high limit and flame safety programmer
    • Can be equipped with catalyst module
    • Manufactured in 2003
    • Dimensions L=11', W=6', H=7'
    • Weight = 4,000 lbs


    Interested in this Product?Get a hold of us for more information

  • Unit 106 - 2,000 CFM Thermal Accelerator

    Unit 106
    • 2 units available
    • Excellent condition
    • Manufactured in 2014
    • 10,000 operating hours
    • Airflow capacity 500 - 2,000 SCFM
    • Processing capability up to 8 mmBtuh
    • Detonation arrestor
    • Gas train connection 2" NPT, 2-5 psig
    • Natural gas or propane
    • Liquid fuel train 3/4", 20 psig @ 40 gph
    • Process inlet connection 10" flanged
    • Stainless steel stack, 30" diameter, 15' AGL
    • Allen Bradley PLC based control panel
    • 480/3/60 power input, 30 amp
    • Honeywell burner control and high limit
    • Dimensions L=32', W=8', H=10'
    • Weight 12,000 lbs


    Interested in this Product?Get a hold of us for more information

  • Unit 108 - 5,000 CFM Regenerative Thermal Oxidizer (RTO)

    Unit 108
    • 2 chamber RTO
    • Excellent condition
    • Air flow capacity 2,000-5,000 SCFM
    • Heat recovery 93-95%
    • Pneumatic poppet valve
    • Allen Bradley PLC controls with HMI (new in 2014)
    • Power input 480/3/60 100 amp
    • Allen Bradley Series 700 main fan VFD
    • Pressure control
    • 40hp process blower
    • 3hp combustion blower
    • Fresh air damper
    • Inlet isolation valve
    • Burner and gas train 5 psig, 600 CFH
    • Compressed air pnput 20 CFH, 70-100 psig, -40 dew point
    • Manufactured in 2008
    • Stack to 20' AGL
    • Dimensions L=25', W=12.5', H=17'
    • Assembled Weight 40,000 lbs 
    Interested in this Product?Get a hold of us for more information

  • Unit 111 - 4,000 CFM Regenerative Thermal Oxidizer (RTO)

    Unit 111
    • 2 chamber RTO
    • Excellent condition
    • Air flow capacity 2,000-4,000 SCFM induced draft
    • Heat recovery 93-95%
    • Electric drive poppet valve
    • Allen Bradley PLC controls with HMI (new in 2014)
    • Power input 480/3/60 100 amp
    • Yaskawa main fan VFD
    • Pressure control
    • 25hp process blower
    • 1/2hp combustion blower
    • Fresh air damper
    • Burner and gas train 5 psig, 600 CFH
    • Manufactured in 2008
    • Stack to 20' AGL
    • Dimensions L=8', W=11', H=17'
    • Assembled Weight 40,000 lbs 
    Interested in this Product?Get a hold of us for more information